NTCIP 1202 v03 :2019

Identifies and defines object definitions that may be supported by an ASC.
NTCIP 1202 v03, an NTCIP standards publication, identifies and defines how a management station may wish to interface with a field device to control and monitor traffic signal controllers and associated detectors in an NTCIP-conformant fashion. NTCIP 1202 v03 uses only metric units.NTCIP 1202 v03 is titled Actuated Signal Controllers (ASC) Interface Protocol to express the multiple sections and annexes that are included in NTCIP 1202 v03. This NTCIP 1200-series standards publication has grown beyond the “object definitions” that were reflected in the title for its predecessors, NTCIP 1202 versions v01 and v02 (2005).NTCIP 1202 v03 defines data elements for use with Actuated Signal Controller Units. The data is defined using the Simple Network Management Protocol (SNMP) object-type format as defined in RFC 1212 and the defined NTCIP format defined in NTCIP 8004. This data would typically be exchanged using one of the NTCIP 1103 recognized Application Layers (e.g., SNMP).NTCIP 1202 v03 follows an established systems engineering approach to support procurement processes. The PRL is designed to allow an agency to indicate what user needs are applicable to a procurement, and to select which requirements are to be implemented in a project specificimplementation. Proper completion of the PRL by the agency results in a specification that is more likely to satisfy the agency’s project needs and that is conformant to NTCIP 1202 v03. The RTM defines the interface specifications for those requirements selected, and can be used to develop the test plans and test procedures.The following keywords apply to this document: AASHTO, ITE, NEMA, NTCIP, ASC, data, data dictionary, object, MIB, PRL and RTM.NTCIP 1202 v03 includes a number of normative and four informative annexes.